Embark on a transformative learning odyssey, fortified by the academic treasure nestled within the 350-801 dumps. Crafted to parallel the diverse contours of the syllabus, the 350-801 dumps radiate a spectrum of practice questions, endorsing proficiency. Whether the succinct narratives of PDFs pique your interest or the experiential realms of the VCE format enthral, the 350-801 dumps are the gold standard. A meticulous study guide, embedded within the 350-801 dumps, elucidates complex concepts, making them accessible. Standing as a testament to our belief in these resources, we proudly uphold our 100% Pass Guarantee.
Elevate your chances of acing the 350-801 exam with our expertly-crafted 350-801 VCE and PDF study tools
Question 1:
Which statement about Cisco Unified Communications Manager and Cisco IM and Presence backups is true?
A. Backups should be scheduled during off-peak hours to avoid system performance issues.
B. Backups are saved as .tar files and encrypted using the web administrator account.
C. Backups are saved as unencrypted .tar files.
D. Backups are not needed for subscriber Cisco Unified Communications Manager and Cisco IM and Presence servers.
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1_SU1/Administration/cucm_b_administration-guide-1151su1/cucm_b_administration-guide-1151su1_chapter_01010.html#CUCM_TK_S7FC26D5_00
Question 2:
Which description of the function of call handlers in Cisco Unity Connection is true?
A. They answer calls, take messages, and provide menus of options.
B. They provide access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.
C. They collect information from callers by playing a series of questions and recording the answers.
D. They control outgoing calls by allowing you to specify the numbers that Cisco Unity Connection can dial to transfer calls, notify users of messages, and deliver faxes.
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx/10xcucsag080.html
Question 3:
An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. The Cisco UCM cluster fails to receive the SIP notify messages. Which two SIP trunk settings resolve this issue? (Choose two.)
A. transmit security status
B. accept unsolicited notification
C. allow charging header
D. accept out-of-band notification
E. accept out-of-dialog refer
Correct Answer: BE
Question 4:
Refer to the exhibit.
A call from +1 613 555 1234 that is sent out through the Nice Gateways should result in a calling party of 001 613 555 1234 with the numbering type “international”. Which configuration accomplishes this goal?
A. \+1.! none pre-dot 001 international
B. \+.001! pre-dot 1 international
C. 613XXXXXXX none +011 international
D. \+.! pre-dot 00 international
Correct Answer: D
In this link you can see the same example with the solution: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab12/collab12/dialplan.html
Question 5:
Which two functionalities does Cisco Expressway provide in the Cisco Collaboration architecture? (Choose two.)
A. Survivable Remote Site Telephony functionality
B. customer interaction management services
C. secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence Video endpoints
D. MGCP gateway registration
E. Secure business-to-business communications
Correct Answer: CE
Question 6:
A Cisco collaboration engineer is troubleshooting unexpected SIP call disconnects. Which three responses correspond to the 5xx range (Chose three).
A. Server timeout
B. Bad request
C. Temporarily unavailable
D. Service unavailable
E. Forbidden
F. Version not supported
Correct Answer: ADF
Question 7:
Which type of greeting in the Call Handler configuration in Cisco Unity Connection overtimes all other greetings?
A. holidays
B. supervisory
C. alternate
D. priority
Correct Answer: C
Can be used for a variety of special situations, such as vacations or a leave. An alternate greeting overrides all other greetings. Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx/10xcucsag080.html
Question 8:
An engineer is configuring a phone system CISCO UCM and wants to activate TFTP service. The engineer selects the serviceability page for configuration. Which nodes configurable for TFTP?
A. any two nodes
B. any node
C. only nodes that have Cisco UCM service enabled
D. any subscriber nodes
Correct Answer: C
TFTP is a network protocol that is used to transfer files between devices. It is often used to transfer firmware and configuration files to network devices. In order to use TFTP, the device must have a TFTP server configured. In Cisco UCM, the TFTP server is configured on the serviceability page. The TFTP server can be configured on any node that has Cisco UCM service enabled. The TFTP server cannot be configured on nodes that do not have Cisco UCM service enabled.
Question 9:
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager. Which action should be taken when building a variable-length route pattern?
A. reduce the T302 timer to less than 4 seconds
B. configure single route pattern for international calls
C. create a second route pattern followed by the # wildcard
D. set up all international route patterns to 0.1
Correct Answer: C
When building a variable-length route pattern, you need to create a second route pattern followed by the # wildcard. This will allow the user to indicate the end of the number by dialing #. For example, if you want to create a route pattern for
international calls, you would create a route pattern like this:
9.011!#
This route pattern will match any number that starts with 9.011, followed by any number of digits, and then ends with #.
The other options are incorrect because:
Configuring a single route pattern for international calls will not allow the user to indicate the end of the number.
Setting up all international route patterns to 0.! will not allow the user to indicate the end of the number.
Reducing the T302 timer to less than 4 seconds will not allow the user to indicate the end of the number.
Question 10:
What is a function of a call handler in Cisco Unity Connection?
A. It controls outgoing calls by allowing an administrator to specify the numbers that Cisco Unity Connection dials to transfer calls, notify users of messages, and deliver faxes.
B. It provides access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.
C. It answers calls, take messages, and provide menus of options.
D. It collects information from callers by playing a series of questions and recording the answers.
Correct Answer: C
Question 11:
A collaboration engineer is configuring the QoS trust boundary for Cisco UCM voice and video conferencing. Which two trust boundary configurations are valid? (choose two)
A. QoS trust boundaries include all the devices directly attached to the access switch ports
B. QoS trust boundaries can be extended to Jabber running on a PC
C. QoS trust boundaries exclude Jabber softphone running on a PC
D. QoS trust boundaries can be extended to voice and video devices if the connected PCs are included
E. QoS trust boundaries can be extended to voice and video devices exclusively
Correct Answer: CD
Question 12:
Refer to the exhibit.
A customer wants the SIP 200 OK shown to advertise codecs in the following order:
1.
G.729
2.
G.711u
3.
G.711a
4.
G.723
After correcting the codec preferences. What should the audio payload show in the SIP Traces?
A. m=audio 0 RTP/AVP 0 8 18 4 15
B. m=audio 0 RTP/AVP 4 0 8 18 15
C. m=audio 0 RTP/AVP 0 18 8 4 15
D. m=audio 0 RTP/AVP 18 0 8 4 15
Correct Answer: D
You could probably get thru the test just knowing the payload IDs for G.711u being 0 and G.729 being 18.
G.729 = 18 G.711u= 0 G.711a = 8
G.723 = 4
G.728 = 15
https://datatracker.ietf.org/doc/html/rfc3551#page-32
Question 13:
Which four requirements are mandatory to enable a mixed mode Cisco Unified CM cluster? (Choose four.)
A. Cisco CTL Provider Service activated and enabled
B. Cisco Certificate Authority Proxy Function activated and enabled
C. Cisco Trust Verification activated and enabled
D. Cisco CTL client
E. a minimum of one USB e-token
F. a minimum of two USB e-token
G. a minimum of one soft e-token
Correct Answer: ABDF
Question 14:
An administrator troubleshoots call flows and suspects that there are issues with the dial plan. Which tool enables a quick analysis of the dial plan and provides call flows of dialed digits?
A. Dial Plan Analyzer
B. Dialed Number Analyzer
C. Cisco Dial Plan Analyzer
D. Digit Analysis Analyzer
Correct Answer: B
Reference: https://aurus5.com/blog/cisco/configuring-dialedconfiguring-dialed-number-analyzer-in-cucm/
Question 15:
DRAG DROP
Drag and drop the SNMPv3 message types from the left onto the corresponding definitions on the right.
Select and Place:
Correct Answer:
