Begin your certification saga, empowered by the profound insights offered by the 350-801 dumps. Crafted with finesse to mirror the vast expanse of the curriculum, the 350-801 dumps offer a panorama of practice questions, anchoring a deep-rooted understanding. Be it the intuitive design of PDFs that appeals or the engrossing narrative of the VCE format that captivates, the 350-801 dumps are unparalleled. A pivotal study guide, the heart and soul of the 350-801 dumps, elucidates intricate concepts, ensuring unerring clarity. Confident in the transformative potential of these tools, we unhesitatingly endorse our 100% Pass Guarantee.
[Recent Version] Dive into success with the 350-801 PDF and Exam Questions, free and assured to pass
Question 1:
Refer to the exhibit. In this cisco UCM setup configured for EARLY offer, what is the codec preference line in the initial SIP INVITE SDP?
A. m=audio 16444 RTP/AVP 9 18 101
B. m=audio 16444 RTP/AVP 0 8 18 101
C. m=audio 16444 RTP/AVP 18 101
D. m=audio 16444 RTP/AVP 9 0 8 18 101
Correct Answer: C
Question 2:
Refer to the exhibit
A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?
A. The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway
B. The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco
C. The call fails because the Standard Local Route Group is being used only if no configuration is set for the device pools
D. The call fails because device mobility is turned on. and the phone is not configured in New York The engineer must configure which sites the device should be roaming to
Correct Answer: A
Standard local route group would use San Francisco device pool, if there is no device mobility active Device Mobility Info Configuration delivers by IPv4 Subnet a selected Device Pool ; in this case new york device pool and its local gateway in new york
Question 3:
Refer to the exhibit.
An engineer is troubleshooting why PSTN phones are not receiving the caller\’s name when called from a remote Cisco UCM site. An ISDN PRI connection is being used to reach the PSTN. What must the administrator select to resolve the issue?
A. isdn send display ie
B. isdn enable clid
C. isdn outgoing display-ie
D. isdn supp-service name calling
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios/voice/command/reference/vr_book/vr_i2.html
Question 4:
Which task is required when configuring self-provisioning for an end user in Cisco UCM?
A. Enable Auto-Registration.
B. Associate the end user to the Standard CCM Super Users group.
C. Associate the end user to a SIP Profile.
D. Disable Auto-Registration.
Correct Answer: A
This auto registration must be enabled for the self-provisioning to work due to needing the phone able to register to CUCM first.
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/214233-configure-self- provisioning-feature-on-c.html
Question 5:
An engineer must configure a cisco ISR 4000 as an MGCP gateway to download its MGCP-specific configuration from cisco UCM. Which Cisco IOS configuration snippet accomplishes this task?
A. ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2428 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
B. ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config download ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
C. ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 11.5.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
D. ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
Correct Answer: D
Question 6:
An administrator is configuring LDAP for Cisco UCM with Active Directory integration. A customer has requested to use \’ipphone\’ instead of `telephoneNumber \’ as the phone number attribute. Where does the administrator specify this attribute mapping in Cisco UCM?
A. LDAP directory custom user fields
B. LDAP Authentication
C. LDAP directory user fields
D. LDAP custom Filter
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/ CUCM_BK_C95ABA82_00_admin-guide-100_chapter_01101.pdf
Question 7:
Which two elements of a dial plan define the domains that are accessible and are assigned to an endpoint? (Choose two.)
A. Call Admissions Control
B. Route patterns
C. Calling Search Spaces
D. Translation patterns
E. partitions
Correct Answer: CE
Question 8:
An end used at a remote site is trying initiate an ad hoc conference call to an end user at the main site the conference bridge is configured to support G.711 remote user phone only support G.729 the remote end user receives an error message on the phone “cannot complete conference call what is the cause of the issue?
A. The remote phone does not have the conference feature assigned.
B. A Media Termination Point is missing
C. The transcoder resource is missing.
D. A software conference bridge is not assigned
Correct Answer: C
Question 9:
What are two differences between media flow-around and media flow-through on cisco unified Border element? (Choose two.)
A. When using media flow-through, the call signaling and media are passed through the Cisco Unified Border Element
B. When using media flow-through, the call signaling goes through the Cisco Unified Border Element, but media is not passed through it
C. When using media flow-around. the call signaling goes through the Cisco Unified Border Element, but media is not passed through it
D. When using media flow-around, both call signaling and media do not go through the Cisco Unified Border Element
E. When using media flow-through, call signaling goes through the Cisco Unified Border Element but media does not
Correct Answer: AC
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/media-path.html
Question 10:
When designing location-based CAC, how much overprovisioning is calculated for video bandwidth?
A. 10%
B. 15%
C. 20%
D. 25%
Correct Answer: C
Reference: https://www.cisco.com/c/dam/en/us/td/docs/solutions/TelePresence_Network_Systems_1-1_DG.pdf
Question 11:
There is a saturated link that has traffic shaping configured. How is incoming traffic processed?
A. Excess traffic is queued for later transmission.
B. Excess traffic is dropped.
C. Traffic is compressed so that the traffic fits within the bandwidth of the link.
D. Excess traffic is queued, and then dropped after the timer expires.
Correct Answer: A
Question 12:
The IP phones at a customer site do not pick an IP address from the DHCP. An engineer must temporarily disable LLDP on all ports of the switch to leave only CDP. Which two commands accomplish this task? (Choose two.)
A. Switch(config)# no lldp transmit
B. Switch# configure terminal
C. Switch# copy running-config startup-config
D. Switch(config)# no lldp run
E. Switch(config)# interface GigabitEthernet1/0/1
Correct Answer: BD
Question 13:
An engineer roust configure DTMF relay on a Cisco Unified Border Element by using RFC2833 as the preferred relay mechanism and KPML as the next preferred relay mechanism. The engineer logs in to the CUBE and enters the dial-peer configuration level.
Which command should be run at dial-peer configuration level?
A. dtmf-relay sip-kvmi rtp-nte
B. dtmf- relay rtp-nte sip-kpml
C. dtmf-relay sip-kgml rtp-inband
D. dtmf-relay rtp-inband sip-kvmi
Correct Answer: B
The dtmf-relay command is used to configure DTMF relay on a Cisco Unified Border Element. The rtp-nte option specifies that RFC2833 is the preferred relay mechanism, and the sip-kpml option specifies that KPML is the next preferred relay mechanism.
Question 14:
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two.)
A. A server template must be created in Cisco UCM.
B. A data file in Extensible Markup Language format by uploaded to Cisco UCM.
C. A data file in Abstract Syntax Notation One format by uploaded to Cisco UCM.
D. A device template must be created in Cisco UCM.
E. A data file in comma-separated values format must be uploaded to Cisco UCM.
Correct Answer: DE
For bulk configuration transactions on the Cisco Unified Communications Manager database, the BAT process uses two components: a template for the device type and a data file in comma separated value (CSV) format that contains the unique values for configuring a new device or updating an existing record in the database. The CSV data file works in conjunction with the device template.
Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/9_0_1/CUCM_BK_C22BD805_00_cucm-bulk-administration-guide_chapter_01.pdf
Question 15:
Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default?
A. the Operator call handler
B. the Goodbye call handler
C. the Directory handler
D. the Interview handler
Correct Answer: B
Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/unity/3x/administration/guide/313/SAG_0200.html