Take advantage of the 100 Pass Guarantee by diving into our free 200-301 study guide resources

Embark on a transformative journey where learning is an adventure and the 200-301 dumps are your trusted companions. Crafted for thinkers who break the mold, the 200-301 dumps unveil an enriching array of practice questions, each a beacon of enlightenment. Be it the structured simplicity of PDFs or the engaging depth of the VCE format that resonates, the 200-301 dumps are your map to uncharted territories. An avant-garde study guide, seamlessly intertwined with the 200-301 dumps, offers unique perspectives, ensuring a comprehensive grasp of concepts. Holding these tools in the highest regard, we confidently spotlight our 100% Pass Guarantee.

[Recent Launch] Ace your exams with the gratis 200-301 PDF and Exam Questions, ensuring perfect scores

Question 1:

What is a characteristic of an SSID in wireless networks?

A. identifies an access point on a WLAN

B. uses the password to connect to an access point

C. uses policies to prevent unauthorized users

D. uses a case-sensitive text string

Correct Answer: D



Question 2:

Refer to the exhibit. Users need to connect to the wireless network with IEEE 802. 11r-compatible devices. The connection must be maintained as users travel between floors or to other areas in the building. What must be the configuration of the connection?

A. Select the WPA Policy option with the CCKM option.

B. Disable AES encryption.

C. Enable Fast Transition and select the FT 802.1x option.

D. Enable Fast Transition and select the FT PSK option.

Correct Answer: D



Question 3:

DRAG DROP

Drag and drop the Wi-Fi terms from the left onto the descriptions on the right.

Select and Place:

Correct Answer:

Wireless LAN 802.11 Service Sets



Question 4:

What is a characteristic of a collapsed-core network topology?

A. It enables all workstations in a SOHO environment to connect on a single switch with internet access.

B. It enables the core and access layers to connect to one logical distribution device over an EtherChannel.

C. It allows wireless devices to connect directly to the core layer, which enables faster data transmission.

D. It allows the core and distribution layers to run as a single combined layer.

Correct Answer: D



Question 5:

In which situation is private IPv4 addressing appropriate for a new subnet on the network of an organization?

A. There is limited unique address space, and traffic on the new subnet will stay local within the organization.

B. The network has multiple endpoint listeners, and it is desired to limit the number of broadcasts.

C. Traffic on the subnet must traverse a site-to-site VPN to an outside organization.

D. The ISP requires the new subnet to be advertised to the internet for web services.

Correct Answer: A



Question 6:

What is a role of wireless controllers in an enterprise network?

A. centralize the management of access points in an enterprise network

B. support standalone or controller-based architectures

C. serve as the first line of defense in an enterprise network

D. provide secure user logins to devices on the network.

Correct Answer: A



Question 7:

Which type of IPv6 address is similar to a unicast address but is assigned to multiple devices on the same network at the same time?

A. global unicast address

B. anycast address

C. multicast address

D. link-local address

Correct Answer: B

An anycast address is similar to a unicast address but is assigned to multiple devices on the same network at the same time. When a device sends a packet to an anycast address, it is delivered to one of the devices with that address, selected based on the routing protocol\’s best-effort algorithm. This is useful for applications like load balancing and failover, where multiple devices provide the same service and it doesn\’t matter which one handles a particular request.



Question 8:

Refer to the exhibit.

An engineer executed the script and added commands that were not necessary for SSH and now must remove the commands.

A. metric

B. cost

C. longest prefix

D. administrative distance

Correct Answer: D



Question 9:

What is represented by the word “LB20” within this JSON schema?

A. value

B. array

C. object

D. key

Correct Answer: A



Question 10:

What is a function of MAC address learning?

A. It is enabled by default on all VLANs and interfaces

B. It increases the potential for MAC address flooding.

C. It is disabled by default on all interfaces connected to trunks

D. lt increases security on the management VLAN

Correct Answer: A



Question 11:

Which type of wireless encryption is used for WPA2 in pre-shared key mode?

A. AES-128

B. TKIP with RC4

C. AES-256

D. RC4

Correct Answer: A

The shared key may be 256 bits long but the encryption is 128 bits. https://en.wikipedia.org/wiki/Wi-Fi_Protected_Access#:~:text=Each%20wireless%20network%20device%20encrypts,to%2063%20printable%20ASCII%20characters.



Question 12:

Which protocol prompts the Wireless LAN Controller to generate its own local web administration SSL certificate for GUI access?

A. HTTPS

B. RADIUS

C. TACACS+

D. HTTP

Correct Answer: A

You can protect communication with the GUI by enabling HTTPS. HTTPS protects HTTP browser sessions by using the Secure Sockets Layer (SSL) protocol. When you enable HTTPS, the controller generates its own local web administration SSL certificate and automatically applies it to the GUI. You also have the option of downloading an externally generated certificate. Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_011.html



Question 13:

Refer to the exhibit.

What are two conclusions about this configuration? {Choose two.)

A. The spanning-tree mode is Rapid PVST+.

B. This is a root bridge.

C. The root port is FastEthernet 2/1.

D. The designated port is FastEthernet 2/1.

E. The spanning-tree mode is PVST+.

Correct Answer: AC



Question 14:

Refer to the exhibit.

What is missing from this output for it to be executed?

A. double quotes (” “) around the “Cisco Devices” string

B. exclamation point (!) at the beginning of each line

C. square bracket ( [ ) at the beginning

D. curly braket ( } ) at the end

Correct Answer: D



Question 15:

Why would a network administrator choose to implement automation in a network environment?

A. To simplify the process of maintaining a consistent configuration state across all devices

B. To centralize device information storage

C. To implement centralized user account management

D. To deploy the management plane separately from the rest of the network

Correct Answer: A


Leave a Reply

Your email address will not be published. Required fields are marked *