Unleash your potential and redefine your certification journey, underpinned by the monumental insights packed within the 200-301 dumps. Tailored to perfection to align with the multifaceted curriculum, the 200-301 dumps manifest a diverse range of practice questions, facilitating mastery. Whether it\’s the crystalline clarity of PDFs that engages or the dynamic interactivity of the VCE format that mesmerizes, the 200-301 dumps are indispensable. A detailed study guide, at the core of the 200-301 dumps, dispels all ambiguities, ensuring you grasp every detail. Confident in the transformative power of these tools, we unflinchingly champion our 100% Pass Guarantee.
[Fresh Arrival] Secure top marks in exams with the gratis 200-301 PDF and Exam Questions, ensuring a 100% achievement rate
Question 1:
What are two reasons for an engineer to configure a floating static route? (Choose two.)
A. to enable fallback static routing when the dynamic routing protocol fails
B. to route traffic differently based on the source IP of the packet
C. to automatically route traffic on a secondary path when the primary path goes down
D. to support load balancing via static routing
E. to control the return path of traffic that is sent from the router
Correct Answer: AC
Question 2:
What is the function of the control plane?
A. It exchanges routing table information.
B. It provides CLI access to the network device.
C. It looks up an egress interface in the forwarding information base.
D. It forwards traffic to the next hop.
Correct Answer: A
The control plane is responsible for exchange of routing table information between routers . The control plane sets up and maintains the routing tables that the data plane uses to forward packets. It provides a way for routers to learn about the networks they are directly connected to, as well as about other networks that are reachable through other routers.
Question 3:
DRAG DROP Drag the characteristics of network architectures from the left onto the type of architecture on the right
Select and Place:
Correct Answer:
Question 4:
When is the PUT method used within HTTP?
A. to update a DNS server
B. when a nonidempotent operation is needed
C. to display a web site
D. when a read-only operation is required
Correct Answer: A
“Standard REST methods are supported on the API, which includes POST, GET, PUT, and DELETE operations through HTTP. The PUT methods are idempotent, meaning that there is no additional effect if they are called more than once with the same input parameters. The GET method is nullipotent, meaning that it can be called zero or more times without making any changes (or that it is a read-only operation).”
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/aci_multi-site/sw/1x/rest_api_config/b_Cisco_ACI_Multi-Site_REST_Configuration_Guide/b_Cisco_ACI_Multi-Site_REST_Config_Guide_chapter_01.pdf
Question 5:
DRAG DROP
Drag and drop the statements about networking from the left onto the corresponding networking types on the right.
Select and Place:
Correct Answer:
Question 6:
Aside from discarding, which two states does the switch port transition through while using RSTP (802.1w)? (Choose two)
A. listening
B. blocking
C. forwarding
D. learning
E. speaking
Correct Answer: CD
RSTP goes from Discarding, Learning, and Forwarding
Reference: https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/24062-146.html
Question 7:
Refer to the exhibit.
User traffic originating within site B is failing to reach an application hosted on IP address 192.168.0.10, which is located within site A. What is determined by the routing table?
A. The traffic is blocked by an implicit deny in an ACL on router2.
B. The lack of a default route prevents delivery of the traffic.
C. The traffic to 192.168.0.10 requires a static route to be configured in router1.
D. The default gateway for site B is configured incorrectly.
Correct Answer: B
There is no route in the routing table that matches the destination and there is no default route in the routing table for packets whose destination don\’t match any of the routes, so the answer is B. You can\’t determine anything about how a default gateway has been configured by looking at a routing table, default route/gateway of last resort is a different concept than default gateway.
Question 8:
What is a function of a remote access VPN?
A. used cryptographic tunneling to protect the privacy of data for multiple users simultaneously
B. used exclusively when a user is connected to a company\’s internal network
C. establishes a secure tunnel between two branch sites
D. allows the users to access company internal network resources through a secure tunnel
Correct Answer: D
Question 9:
DRAG DROP
Drag and drop the characteristic from the left onto the cable type on the right.
Select and Place:
Correct Answer:
Question 10:
What are two similarities between UTP Cat 5e and Cat 6a cabling? (Choose two.)
A. Both operate at a frequency of 500 MHz.
B. Both support runs of up to 55 meters.
C. Both support runs of up to 100 meters.
D. Both support speeds of at least 1 Gigabit.
E. Both support speeds up to 10 Gigabit.
Correct Answer: CD
Cat5:
Frequency: Up to 100 MHz
Bandwidth: 100 Mbps (Fast Ethernet)
Max Distance: 100 meters (328 feet)
Cat5e:
Frequency: Up to 100 MHz
Bandwidth: 1 Gbps (Gigabit Ethernet)
Max Distance: 100 meters (328 feet)
Cat6:
Frequency: Up to 250 MHz
Bandwidth: 10 Gbps (10 Gigabit Ethernet)
Max Distance: 55 meters (180 feet) for 10 Gbps, 100 meters (328 feet) for 1 Gbps
Cat6a:
Frequency: Up to 500 MHz
Bandwidth: 10 Gbps (10 Gigabit Ethernet)
Max Distance: 100 meters (328 feet)
Cat7:
Frequency: Up to 600 MHz
Bandwidth: 10 Gbps (10 Gigabit Ethernet)
Max Distance: 100 meters (328 feet)
Cat8:
Frequency: Up to 2 GHz
Bandwidth: 25/40 Gbps (25/40 Gigabit Ethernet)
Max Distance: 30 meters (98 feet)
Question 11:
Refer to the exhibit.
How does router R1 handle traffic to 192.168.10.16?
A. It selects the IS-IS route because it has the shortest prefix inclusive of the destination address
B. It selects the RIP route because it has the longest prefix inclusive of the destination address
C. It selects the OSPF route because it has the lowest cost
D. It selects the EIGRP route because it has the lowest administrative distance
Correct Answer: B
1.
Longest Prefix
2.
Administrative distance
3.
Metric https://packetlife.net/blog/2010/aug/16/route-preference/
Question 12:
Which two features introduced in SNMPv2 provides the ability to retrieve large amounts of data in one request
A. Get
B. GetNext
C. Set
D. GetBulk
E. Inform
Correct Answer: DE
SNMPv2 introduced two features that provide the ability to retrieve large amounts of data in one request and acknowledge a trap using PDUs. These features are:
GetBulkRequest: This feature allows a management station to retrieve a large amount of data in one request, reducing the number of requests needed to retrieve the same information. The GetBulkRequest PDU specifies a starting OID and a maximum number of variables to be returned in a single response.
InformRequest: This feature is used to acknowledge receipt of a trap message from an agent. The InformRequest PDU is similar to the trap PDU, but it includes a request identifier, which allows the management station to match the acknowledgment with the original trap. The InformRequest also requires an acknowledgment from the receiving device, which provides greater reliability in trap delivery.
Question 13:
Refer to the exhibit.
Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help resolve the configuration issue?
A. set the default gateway as 20.20.20.2
B. configure a static route with Fa0/1 as the egress interface to reach the 20.20.2.0/24 network
C. configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network
D. set the default network as 20.20.20.0/24
Correct Answer: C
Question 14:
Refer to the exhibit. Which router or router group are NTP clients?
A. R1
B. R2 and R3
C. R1, R3, and R4
D. R1, R2, and R3
Correct Answer: D
Pretty sure you have to have the NTP server configured before you can be a client
Question 15:
Which set of actions satisfy the requirement for multifactor authentication?
A. The user enters a user name and password, and then re-enters the credentials on a second screen.
B. The user swipes a key fob, then clicks through an email link.
C. The users enters a user name and password, and then clicks a notification in an authentication app on a mobile device.
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen.
Correct Answer: C
This is an example of how two-factor authentication (2FA) works:
1.
The user logs in to the website or service with their username and password.
2.
The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3.
The authentication server sends a unique code to the user\’s second-factor method (such as a smartphone app).
4.
The user confirms their identity by providing the additional authentication for their second-factor method.