Forge ahead in your certification aspirations, backed by the monumental wisdom encapsulated within the NSE4_FGT-7.2 dumps. Designed meticulously to echo the diverse spectrum of the syllabus, the NSE4_FGT-7.2 dumps unfold a vast tapestry of practice questions, nurturing an unerring command. Whether the succinct articulation of PDFs resonates or the captivating interactivity of the VCE format intrigues, the NSE4_FGT-7.2 dumps promise excellence. A robust study guide, intrinsically tied to the NSE4_FGT-7.2 dumps, deciphers the maze of concepts, ensuring you\’re well-prepared. Steadfast in our belief in these materials, we vehemently uphold our 100% Pass Guarantee.
[Now Available] Enhance your exam mastery with our latest NSE4_FGT-7.2 PDF and Exam Questions, committing to 100% success
Question 1:
An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.)
A. The interface has been configured for one-arm sniffer.
B. The interface is a member of a virtual wire pair.
C. The operation mode is transparent.
D. The interface is a member of a zone.
E. Captive portal is enabled in the interface.
Correct Answer: ABC
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-whats-new-54/Top_VirtualWirePair.htm
Question 2:
An administrator is configuring an Ipsec between site A and siteB. The Remotes Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192. 16. 1.0/24 and the remote quick mode selector is 192. 16.2.0/24. How must the administrator configure the local quick mode selector for site B?
A. 192. 168.3.0/24
B. 192. 168.2.0/24
C. 192. 168. 1.0/24
D. 192. 168.0.0/8
Correct Answer: B
Question 3:
The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile. What order must FortiGate use when the web filter profile has features enabled, such as safe search?
A. DNS-based web filter and proxy-based web filter
B. Static URL filter, FortiGuard category filter, and advanced filters
C. Static domain filter, SSL inspection filter, and external connectors filters
D. FortiGuard category filter and rating filter
Correct Answer: B
FortiGate Security 7.2 Study Guide (p.285): “Remember that the web filtering profile has several features. So, if you have enabled many of them, the inspection order flows as follows:
1.
The local static URL filter
2.
FortiGuard category filtering (to determine a rating)
3.
Advanced filters (such as safe search or removing Active X components)” Reference: https://fortinet121.rssing.com/chan-67705148/all_p1.html
Question 4:
Refer to the exhibit.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option.
What is the impact of using the Include in every user group option in a RADIUS configuration?
A. This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group.
B. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.
C. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate.
D. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.
Correct Answer: A
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/634373/authentication-servers
Question 5:
An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway. What must an administrator do to achieve this objective?
A. The administrator can register the same FortiToken on more than one FortiGate.
B. The administrator must use a FortiAuthenticator device
C. The administrator can use a third-party radius OTP server.
D. The administrator must use the user self-registration server.
Correct Answer: B
Question 6:
Which of statement is true about SSL VPN web mode?
A. The tunnel is up while the client is connected.
B. It supports a limited number of protocols.
C. The external network application sends data through the VPN.
D. It assigns a virtual IP address to the client.
Correct Answer: B
FortiGate_Security_6.4 page 575 – Web mode requires only a web browser, but supports a limited number of protocols.
Question 7:
Refer to the exhibit.
An administrator is running a sniffer command as shown in the exhibit.
Which three pieces of information are included in the sniffer output? (Choose three.)
A. Interface name
B. Ethernet header
C. IP header
D. Application header
E. Packet payload
Correct Answer: ACE
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=11186
Study Guide Routing Diagnostics Packet Capture Verbosity Level.
# diagnose sniffer packet `\’
In the example, verbosity is 5.
The verbosity level specifies how much info you want to display.
1 (default): IP Headers.
2: IP Headers, Packet Payload.
3. IP Headers, Packet Payload, Ethernet Headers.
4: IP Headers, Interface Name.
5: IP Headers, Packet Payload, Interface Name.
6: IP Headers, Packet Payload, Ethernet Headers, Interface Name.
Question 8:
A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service.
What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?
A. Static IP Address
B. Dialup User
C. Dynamic DNS
D. Pre-shared Key
Correct Answer: B
Dialup user is used when the remote peer\’s IP address is unknown. The remote peer whose IP address is unknown acts as the dialup clien and this is often the case for branch offices and mobile VPN clients that use dynamic IP address and no dynamic DNS
Question 9:
Which two actions can you perform only from the root FortiGate in a Security Fabric? (Choose two.)
A. Shut down/reboot a downstream FortiGate device.
B. Disable FortiAnalyzer logging for a downstream FortiGate device.
C. Log in to a downstream FortiSwitch device.
D. Ban or unban compromised hosts.
Correct Answer: AB
Question 10:
Refer to the exhibits.
Exhibit A shows a topology for a FortiGate HA cluster that performs proxy-based inspection on traffic. Exhibit B shows the HA configuration and the partial output of the get system ha status command.
Based on the exhibits, which two statements about the traffic passing through the cluster are true? (Choose two.)
A. For non-load balanced connections, packets forwarded by the cluster to the server contain the virtual MAC address of port2 as source.
B. The traffic sourced from the client and destined to the server is sent to FGT-1.
C. The cluster can load balance ICMP connections to the secondary.
D. For load balanced connections, the primary encapsulates TCP SYN packets before forwarding them to the secondary.
Correct Answer: AD
FortiGate Infrastructure 7.2 Study Guide (p.317 and p.320): “To forward traffic correctly, a FortiGate HA solution uses virtual MAC addresses.” “The primary forwards the SYN packet to the selected secondary. (…) This is also known as MAC address rewrite. In addition, the primary encapsulates the packet in an Ethernet frame type 0x8891. The encapsulation is done only for the first packet of a load balanced session. The encapsulated packet includes the original packet plus session information that the secondary requires to process the traffic.”
Question 11:
Refer to the exhibit.
Given the interfaces shown in the exhibit. which two statements are true? (Choose two.)
A. Traffic between port2 and port2-vlan1 is allowed by default.
B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain.
C. port1 is a native VLAN.
D. port1-vlan and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.
Correct Answer: CD
https://community.fortinet.com/t5/FortiGate/Technical-Tip-rules-about-VLAN-configuration- and-VDOM-interf https://kb.fortinet.com/kb/viewContent.do?externalId=FD30883
Question 12:
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?
A. set fortiguard-anycast disable
B. set webfilter-force-off disable
C. set webfilter-cache disable
D. set protocol tcp
Correct Answer: A
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48294
Question 13:
Which statements best describe auto discovery VPN (ADVPN). (Choose two.)
A. It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes.
B. ADVPN is only supported with IKEv2.
C. Tunnels are negotiated dynamically between spokes.
D. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.
Correct Answer: AC
Question 14:
Which two protocol options are available on the CLI but not on the GUI when configuring an SD-WAN Performance SLA? (Choose two.)
A. DNS
B. ping
C. udp-echo
D. TWAMP
Correct Answer: CD
Question 15:
Refer to the exhibit.
Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)
A. There are five devices that are part of the security fabric.
B. Device detection is disabled on all FortiGate devices.
C. This security fabric topology is a logical topology view.
D. There are 19 security recommendations for the security fabric.
Correct Answer: CD
References: https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/761085/results https://docs.fortinet.com/document/fortimanager/6.2.0/new-features/736125/security-fabric-topology