Venture beyond the familiar, and embrace the vast horizons of knowledge with the 350-801 dumps. Sculpted for those who dare to dream, the 350-801 dumps house a myriad of practice questions, each a catalyst for profound insights. Whether it\’s the transparent simplicity of PDFs or the storytelling prowess of the VCE format that captivates, the 350-801 dumps are your beacon in the night. A revolutionary study guide, in perfect alignment with the 350-801 dumps, paves pathways through intricate knowledge webs, ensuring nothing remains obscured. Grounded in the sheer efficacy of these tools, we proudly emphasize our 100% Pass Guarantee.
[Contemporary Update] Secure your victory with the free download of 350-801 PDF and Exam Questions, promising 100% success
Question 1:
Which type of input is required when configuring a third-party SIP phone?
A. digest user
B. serial number
C. manufacturer
D. authorization code
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_0101100.html
Question 2:
Refer to the exhibit.
Cisco Unified Border Element is attempting to establish a call with Subscriber 1, but the call fails. Cisco Unified Border Element then retries the same call with Subscriber 2, and the call proceeds normally. Which action resolves the issue?
A. Verify that the Run On All Active Unified CM Nodes checkbox is enabled.
B. Verify that the correct calling search space is selected for the Inbound Calls section.
C. Verify that the Significant Digits field for Inbound Calls is set to All.
D. Verify that the PSTN Access checkbox is enabled.
Correct Answer: A
503 – Service Unavailable – The server\’s SIP service is temporarily unavailable. If CSS is missing it would not find a proper DN, and will return <404 – not found<
Since there is no answer of several Trunks, it only explains one trunk and >Run On All Unified CM Nodes< should put in concern
Question 3:
An end user at a remote site is trying to initiate an Ad Hoc conference call to an end user at the main site. The conference receives an error message on the phone: Cannot complete conference call. What is the cause of the issue?
A. The transcoder resource Is missing.
B. The remote phone does not have the conference feature assigned
C. A software conference bridge is not assigned.
D. A Media Termination Point is missing.
Correct Answer: A
Question 4:
Refer to the exhibit.
This INVITE is sent to an endpoint that only supports G729. What must be done for this call to succeed?
A. Nothing: both sides support G.729.
B. Add a transcoder that supports G711ulaw and G.729.
C. Add a media termination point that supports G.711ulaw and G.729.
D. Nothing: both sides support payload type 101.
Correct Answer: B
A transcoder takes the media stream of one codec and transcodes (converts) it from one compression type to another compression type. For example, it could take a stream from a G.711 codec and transcode (convert) it in real time to a
G.729 stream. In addition to codec conversion, a transcoder resource can also provide MTP/TRP functionality to a call.
Question 5:
In which location does an administrator look to determine which subscriber the phone registers to if loses registration with the current Cisco UCM subscriber?
A. On Cisco UCM Administration Page Device > Phone > Phone Configuration page
B. On Cisco UCM Administrator Page server > Cisco UCM
C. On Cisco UCM Administrator page system > Device Pool > Cisco UCM group
D. On Cisco UCM Administrator page system > Enterprise Parameters
Correct Answer: C
Question 6:
Which DSCP marking is represented as 101110 in an IP header?
A. EF
B. CS3
C. AF41
D. AF31
Correct Answer: A
Question 7:
Refer to the exhibit. A collaboration engineer adds an analog gateway to a Cisco UCM cluster. The engineer chooses MGCP over SCCP as the gateway protocol.
Which two actions ensure that the gateway registers? (Choose two.)
A. Delete and re-add the gateway configuration in Cisco UCM.
B. Enter “mgcp” on the gateway in configuration mode.
C. Enter “no sccp” on the gateway in configuration mode.
D. Enter “ccm-manager config” on the gateway in configuration mode.
E. Enter “ccm-manager mgcp” on the gateway in configuration mode.
Correct Answer: BE
Reference: https://community.cisco.com/t5/unified-communications/cisco-router-2901-mgcp-x-callmanager-9-1-1/td-p/2419551
Question 8:
Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan. How long is the default wait time?
A. 5 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Correct Answer: C
Question 9:
User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)
A. Incorrect partition
B. No region relationship
C. Network congestion
D. Incorrect QoS
E. Incompatible codec
Correct Answer: CD
Question 10:
Refer to the exhibit.
Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last.
How is the call treated when an IP phone in the Bangalore GeoLocation places a call to a MGCP gateway with FXS ports in the San Jose GeoLocation?
A. The call is denied because the last added logical partition policy takes precedence when multiple matches exist.
B. The call is allowed because the first listed logical partition policy takes precedence when multiple matches exist.
C. The call is denied because the call flow matches neither policy entries.
D. The call is allowed because the call flow matches neither policy entries.
E. The call is allowed because only the top policy entry matches the call flow.
Correct Answer: A
Question 11:
Configuration of DNS is required to achieve a fully functional Cisco UCM system. Cisco UCM uses DNS to resolve fully qualified domain names to IP addresses for which destinations?
A. H.323
B. trunk
C. AAR
D. MRA
Correct Answer: B
MRA isn\’t part of a fully functioning UCM system… Unified CM can use DNS to:
–
Resolve service (SRV) records to host names and then to IP addresses for SIP trunk destinations
–
Resolve service (SRV) records to host names and then to IP addresses for SIP trunk destinations https://community.cisco.com/t5/ip-telephony-and-phones/2-part-question-regarding-dns-on-cucm/td-p/2256179
Question 12:
A Cisco Unity Connection administrator receives a name change request from a voice-mail user, whose Cisco Unity Connection user account was imported from Cisco Unified Communications Manager. What should the administrator do to execute this change?
A. Change the user data in the Cisco Unity Connection administration page, then use the Synch User page in Cisco Unity Connection administration to push the change to Cisco Unified Communications Manager.
B. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in Cisco Unity Connection administration to pull the changes from Cisco Unified CM.
C. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in Cisco Unified CM administration to push the change to Cisco Unity Connection.
D. Change the user profile from Imported to Local on Cisco Unity Connection Administration, then edit the data locally on Cisco Unity Connection.
E. Change the user data in Cisco Unity Connection and Cisco Unified Communications Manager separately.
Correct Answer: B
As we can see user are getting synch from call manager so we first have to change the details of user on call manager so that user will synch the changes from call manager.
Question 13:
What happens when a Cisco IP phone loses connectivity to the duster during an active call?
A. The call continues to be active, but features like transfer or hold do not work.
B. The call continues and all features work.
C. The call drops immediately.
D. The call drops after missing two keepalives from Cisco UCM.
Correct Answer: A
Question 14:
Refer to the exhibit.
A collaboration engineer needs to replace the original, single NTP server that was configured during the initial install of a Cisco UCM server. What is the first step to accomplish this task?
A. Stop the NTP service on Cisco UCM.
B. Enable NTP authentication for the new NTP server on Cisco UCM.
C. Restart the NTP service on Cisco UCM.
D. Delete the original NTP server from Cisco UCM.
Correct Answer: D
If you look at the exhibit on the “utils ntp status”, it shows two original servers installed. And if you ready the question carefully, there is a “,” after “original,”, which means, from two original NTP servers, only single NTP server needs to be delete. So you can delete a single NTP server from the two listed NTP servers. However, even if there is only one server, you can\’t enable authentication for the new NTP server, you need first add it, then enable it with command “utils ntp auth symmetric-key enable” which you get prompt to select for enable the authentication for the listed servers:
admin:utils ntp auth symmetric-key enable At the end, nothing in the question mentioned about NTP authentication, as you can see authentication report with the following command: admin:utils ntp auth symmetric-key status
Question 15:
An employee of company ABC just quit. The IT administrator deleted the employee\’s userid from the active directory at 10 a m. on March 4th The nightly sync occurs at 10 p.m daily. The IT administrator wants to troubleshoot and find a way to delete the userid as soon as possible How is this issue resolved?
A. Wait until 10 pm on March 4th when the user is automatically removed from Cisco UCM
B. Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.
C. Wait until 3:15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.
D. Wait until 3:15 a.m. on March 5th for garbage collection to remove the user from Cisco UCM
Correct Answer: C
User must be marked inactive for 24 hours before garbage collection will remove Reference: https://community.cisco.com/t5/unified-communications/cucm-active-directory-integretion-question-regarding-the-garbage/td-p/4083543